Advantages   • ZINGA is safe to environment and easy to use. • ZINGA can be applied on site without dismantling the structures. • You can use ZINGA to recoat existing hot-dip galvanizing in order to re-new the    cathodic protection. • ZINGA can be applied on mildly rusty surfaces without sand-blasting after they   have been degreased. • Existing coatings of ZINGA can be covered with a new ZINGA layer the old layer   will reliquidise and fuse together to one single ZINGA layer. • ZINGA has an excellent adhesion (mechanical and chemical) on steel even where it   has been damaged by abrasion. ZINGA does not peel off nor will it allow creeping   rust. • ZINGA has BBA agreement certificate and CONCORDIA product & application   guarantee. • Shelf and pot life of ZINGA is unlimited. • The dry to the touch time of ZINGA is ±5 to 10 minutes. • ZINGA is a non-toxic substance. • ZINGA can be used on surfaces in contact with drinking water. • ZINGA can be used with a topcoat. • The heat resistant of ZINGA is up to 150° C. • ZINGA is flexible and abrasion resistant. • ZINGA can be applied in high environment humidity of 90% and on wet surfaces. • On ZINGA can be welded. • ZINGA is applicable on welded surfaces. • ZINGA has a long lasting durability up to 20 year or more. (Depending to the thickness and environment conditions)   About Us | Seal Products | Design Help | Seal Guru | Seal Failure Causes | Glossary | Seal Express | O-Ring Quote | Contact Us | O-Ring Basics | Elastomer Properties | Elastomer Storage | Chemical Compatibility | Profile Chart | Oil Seal | O-Rings | Pneumatic & Hydraulic Seals | Shaft Seal | Engineering Plastic | Protector & Cap | V-Packing | Packer Elements | PTFE Seal | PTFE Joint Seal | Bonded Seal | Valve Seats | PPS Seals | HNBR Seal | NBR Seal | EPDM Sea| FKM Seal | PEEK Seal | Gas Lifts | API Seal Rings | Casing O-Rings | Gas Lift Valve Seals | PU Seals | MQ Seals | Seals for Premium Connections | Link Us |